Kyocera TASKalfa 221 - Multi Purpose Tray Settings; Paper Size; Machine Management Code Change

System Menu
3-26
Machine Management Code Change
You can change the four-digit management code for security management.
Note If you change the management code, be sure not to forget it. If you forget the management code,
contact you service representative.
The management code at the factory default setting is 1800 for the 18 ppm model and 2200 for the
22 ppm model.
1
Display the Machine default screen. (See How to Display the Machine Default Screen on
page 3-12.)
2
Press the S key or the T key to select
MachineAdmin Code and than press the Enter key.
3
Enter the new management code using the numeric
keys, and than press the Enter key.
4
Press the Reset key.
The message display returns to the copier basic screen.
Multi Purpose Tray Settings
Set the following items for feeding paper from the multi-purpose tray.
Paper Size
Set the size of paper to be used from the multi-purpose tray. You can use irregular size paper by
inputting the size.
Note If the paper size is unknown or no particular paper size setting is required, select Universal
Size.
Selecting a Size from Regular Sizes
Sizes that can be set:
Inch Specification — 11 × 17" (Ledger), 8
1/2 × 14" (Legal), 8 1/2 × 13" (Oficio II), 8 1/2 × 11" (Letter),
11 × 8 1/2", 5 1/2 ×81/2" (Statement), A4R, A4
Metric Specification — A3, B4, A4R, A4, B5R, B5, A5R, B6R, A6R, 8
1/2 × 11" (Letter), 11 × 8 1/2",
Folio
1
Press the System Menu/Counter key.
2
Press the S key or the T key to select MP Tray
setting.
3
Press the Enter key.
Auto Clear Time
Silent Mode
Machine Default :
MachineAdminCode
Sec.
On:
: 1234
:90
Machine Admin . Code Change :
1800
#keys
End
System Menu / Counter :
Language
MP Tray Setting