Kyocera TASKalfa 221 - Carriage Return (CR) Action; Wide A4

Printer Settings
2-31
Carriage Return (CR) Action
Set the action of the machine to be executed when it receives a carriage return code (0DH).
1
Display the Page Set screen. (See How to Display the Page Set Screen on page 2-28.)
2
Press the S key or the T key to select CR Action.
3
Press the Enter key.
4
Press the S key or the T key to select the desired
action from CR only, CR and LF, and Ignore CR.
CR only: Performs a carriage return.
CR and LF: Performs a carriage return and line feed.
Ignore CR: Does not perform a carriage return.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the printer basic screen.
Wide A4
The print area of the A4 size can be enlarged.
1
Display the Page Set screen. (See How to Display the Page Set Screen on page 2-28.)
2
Press the S key or the T key to select Wide A4.
3
Press the Enter key.
4
Press the S key or the T key to select On or Off.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the printer basic screen.
Page Set
Page Protect
LF Action
CR Action
Back
CR only
CR
Action
CR and LF
Page Set
LF Action
CR Action
Wide A4
Back
On
Wide A4
Off