Kyocera TASKalfa 221 - Collate Copying

System Menu
3-8
Density Adjustment for Text Originals
Adjust the density of the central value in the manual density mode for text originals.
1
Display the Copy Default screen. (See How to Display the Copy Default Screen on page 3-2.)
2
Press the S key or the T key to select Txt Ori
Density.
3
Press the Enter key.
4
Press the < key or the > key to adjust the density.
Moving right darkens the density, and moving left
lightens it.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.
Density Adjustment for Photo Originals
Adjust the density of the central value in the manual density mode for photo originals.
1
Display the Copy Default screen. (See How to Display the Copy Default Screen on page 3-2.)
2
Press the S key or the T key to select Photo Ori
Dnsity.
3
Press the Enter key.
4
Press the < key or the > key to adjust the density.
Moving right darkens the density, and moving left
lightens it.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.
Collate Copying
If the optional document finisher is installed, select whether or not to set the collate copy mode as a
default setting.
Note This item is displayed only if the optional document processor is installed.
1
Display the Copy Default screen. (See How to Display the Copy Default Screen on page 3-2.)
Auto dens .(OCR)
Txt+Photo Dens .
Txt Ori Density
Copy Default:
4:
4:
4:
Text Original Density Adjust :
Txt+Photo Dens .
Photo Ori Dnsity
Txt Ori Density
Copy Default:
4:
4:
4:
Photo Original Density Adjust :