Kyocera TASKalfa 221

Copier Functions
1-12
Margin Mode
The image of the original can be shifted to make a margin (blank) space at the left or top side on the
copy. You can set the width of each margin to 1/8" to 3/4" in 1/8" increments [1 mm to 18 mm in
1 mm increments].
Note You can set the default value of the margin width. (See Margin Width Default Value on page 3-10.)
1
Set the original.
2
Press the Margin key.
3
Press the S key or the T key to select Left Margin
or Top Margin.
4
Press the Enter key.
5
Press the < key or the > key to set the margin width.
You can set the width to 1/8" to 3/4" in 1/8" increments
[1 mm to 18 mm in 1 mm increments].
6
Press the Enter key.
7
Press the Start key. Copying starts.
Margin:
Left Margin
Top Margin
Margin Width :
1/8"1/4" 3/4"