Kyocera TASKalfa 221 - Default Magnification

System Menu
3-6
1
Display the Copy Default screen. (See How to Display the Copy Default Screen on page 3-2.)
2
Press the S key or the T key to select Default
Cassette.
3
Press the Enter key.
4
Press the S key or the T key to select the cassette
that will be used with priority.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.
Default Magnification
Select whether or not to set the auto zoom ratio selection mode when a cassette is selected.
1
Display the Copy Default screen. (See How to Display the Copy Default Screen on page 3-2.)
2
Press the S key or the T key to select Default
Magnif.
3
Press the Enter key.
4
Press the S key or the T key to select 100% or
Auto %.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.
Auto Density Adjustment
Adjust the overall density in the auto density mode.
1
Display the Copy Default screen. (See How to Display the Copy Default Screen on page 3-2.)
2
Press the S key or the T key to select Adj.Auto
dens.
3
Press the Enter key.
Paper Selection
Paper Type(Auto )
Copy Default:
Default Cassette
Plain
:
:
Auto
Casset.1
:
Default Cassette :
Cassette 1
Cassette 2
*
Cassette 3
Paper Type(Auto )
Default Cassette
Copy Default:
Default Magnif .
Plain
:
:
100%
Casset.1
:
Default Magnification :
100%
Auto %
*
Default Cassette
Copy Default:
Default Magnif .
Adj. Auto dens .
4
:
:
100%
Casset.1
: