System Menu
3-2
Default Setting Mode
For this machine, the state that the machine enters at the end of warm-up or when the Reset key is
pressed is called initial mode. The settings of this machine that are made automatically in the initial
mode are called default settings. The default settings are divided into the Copier Default Settings
and the Machine Default Settings. These settings can be changed freely according to the method
of use.
Copier Default Settings
You can set the following items as copier default settings.
• Density Mode
• Original Image Quality
•EcoPrint Mode
• Background Color Adjustment
• Paper Selection
• Paper Type in Auto Paper Selection
• Priority Cassette
• Default Magnification
• Auto Density Adjustment
• Auto OCR Density Adjustment
• Density Adjustment for Text + Photo Originals
• Density Adjustment for Text Originals
• Density Adjustment for Photo Originals
• Collate Copying
• Offset Copying
• Auto Rotation Copy
• Margin Width Default Value
• Border Erase Width Default Value
• Limit of Number of Copies
• Black Streaking Reduction Processing
How to Display the Copy Default Screen
Use the following procedure to display the Copy Default screen.
1
Press the System Menu/Counter key.
2
Press the S key or the T key to select Copy
default.
3
Press the Enter key.
4
Use the numeric keys to input the four-digit
management code. The management code at the
factory default setting is 1800 for the 18 ppm model,
2200 for the 22 ppm model.
Print Report
Job Accounting
System Menu / Counter :
Copy Default
Enter Pin Code using # key.
To Next Page
Loading...
