Kyocera TASKalfa 221

System Menu
3-12
Machine Default Settings
You can set the following items as machine default settings.
• Auto Cassette Switching
• Paper Size (cassettes 1 to 4)
• Paper Type (cassettes 1 to 4)
• Multi Purpose Tray Confirmation Display
• Paper Weight for Paper Type
• Duplex Print for Paper Type
• Custom Paper Type
• Original Orientation
• Auto Sleep Time
• Auto Low Power Time
• Copy Output Destination
• Fax Output Destination
• Default Operation Mode
• Key Sound
• Date and Time
• Display Contrast Adjustment
• Administrator Management Code Change
• Auto Sleep
• Auto Clear
• Auto Clear Time
• Silent Mode
• Auto Drum Refresh Setting
How to Display the Machine Default Screen
Use the following procedure to display the machine default setting screen.
1
Press the System Menu/Counter key.
2
Press the S key or the T key to select Machine
default.
3
Press the Enter key.
4
Use the numeric keys to input the four-digit
management code. The management code at the
factory default setting is 1800 for the 18 ppm model,
2200 for the 22 ppm model.
Note The four-digit management code can be changed. (See Administrator Management Code
Change on page 3-23.)
Job Accounting
System Menu / Counter :
Copy Default
Machine Default
Enter Pin Code using # key.