Copier Functions
1-5
Image Quality Mode
You can select the image quality mode according to the type of originals.
1
Set the original.
2
Press the image quality mode select key to select the
desired mode.
3
Press the Start key. Copying starts.
Note • You can adjust the copy density in each of the image quality modes. (See Density Adjustment
for Text + Photo Originals on page 3-7, Density Adjustment for Text Originals on page 3-8
and Density Adjustment for Photo Originals on page 3-8.)
• If you select the Photo mode, the manual copy density mode is set. (See Copy Density
Adjustment on page 1-6.)
Image quality mode Description
Text + Photo Select to copy originals that contain a mixture of both text and
photographs.
Text Select to copy originals that contain large amounts of text, such as
documents.
Photo Select to copy originals that contain photographs.
To Next Page
Loading...
