Kyocera TASKalfa 221 - Page 12

Copier Functions
1-4
6
Press the Enter key.
7
Press the Start key. Copying starts.
Inputting the Original Size
1
Set the original.
2
Press the Original Size key.
3
Press the S key or the T key to select Input size.
4
Press the Enter key.
5
Press the < key or the > key to set the vertical size.
You can set the vertical size to 2" to 11 5/8" in 1/8"
increments [50 to 297 mm in 1 mm increments].
6
Press the T key to move to the horizontal size.
7
Press the < key or the > key to set the horizontal size.
You can set the horizontal size to 2" to 17" in 1/8"
increments [50 to 432 mm in 1 mm increments].
8
Press the Enter key.
9
Press the Start key. Copying starts.
Original Size :
Auto
Input Size
*
Input Size :
2"
2"
Input Size :
2"
2"