Kyocera TASKalfa 221

Printer Settings
2-18
IP Address
Register the IP address of this machine.
Notes • To obtain the IP address to enter, check with your network administrator before performing this
setting.
• Before entering the IP address by following the instructions below, be sure to turn the DHCP
setting Off and the TCP/IP setting On.
1
Display the TCP/IP screen referring to steps 1 to 5 of TCP/IP setting.
2
Press the S key or the T key to select Change #.
3
Press the Enter key.
4
Press the S key or the T key to select IP Address.
5
Press the Enter key.
6
Use the numeric keys to input the IP address. Enter the
first block of 3 digits of the address in the highlighted
area.
7
Press the > key. Enter the next block of 3 digits of the
address in the highlighted area.
8
Continue the same procedure for the other 2 blocks.
9
Press the Enter key.
Next, set the subnet mask.
Subnet Mask
To register the subnet mask, continue the procedure from step 9 above.
1
Press the S key or the T key to select Subnet Mask.
2
Press the Enter key.
3
Use the same procedure as steps 6 to 8 of IP Address
setting to input the address.
On
Off
TCP/IP
Change #
Back
DHCP
TCP/IP Setting
IP Address
IP Address
0 0 ..0 0 .
IP Address
10 0 ..0 0 .
DHCP
IP Address
TCP/IP Setting
Subnet Mask
Subnet Mask
0 0 ..0 0 .