Printer Settings
2-17
TCP/IP
When connecting to a Windows network through TCP/IP, turn TCP/IP On.
1
Display the Interface screen.
2
Press the S key or the T key to select Network.
3
Press the Enter key.
4
Press the S key or the T key to select TCP/IP.
5
Press the Enter key.
6
Press the S key or the T key to select On.
7
Press the Enter key.
DHCP
This machine supports DHCP (Dynamic Host Configuration Protocol). When using DHCP, turn
DHCP On.
1
Display the TCP/IP screen referring to steps 1 to 5 of TCP/IP setting.
2
Press the S key or the T key to select Change #.
3
Press the Enter key.
4
Press the S key or the T key to select DHCP.
5
Press the Enter key.
6
Press the S key or the T key to select On.
7
Press the Enter key.
Back
USB
Interface
Network
Back
NetWare
Network Setting
TCP/IP
Back
On
TCP/IP
Off
On
Off
TCP/IP
Change #
Back
DHCP
TCP/IP Setting
IP Address
Back
On
DHCP
Off
To Next Page
Loading...
