Kyocera TASKalfa 221 - Page 42

Printer Settings
2-16
8
Press the S key or the T key to select Change #.
9
Press the Enter key.
10
Press the S key or the T key to select the frame
mode.
11
Press the Enter key.
12
Press the Reset key. The message display returns to the printer basic screen.
EtherTalk
When using this machine by connecting to an Apple Macintosh computer, turn EtherTalk On.
1
Display the Interface screen.
2
Press the S key or the T key to select Network.
3
Press the Enter key.
4
Press the S key or the T key to select EtherTalk.
5
Press the Enter key.
6
Press the S key or the T key to select On.
7
Press the Enter key.
8
Press the Reset key. The message display returns to the printer basic screen.
On
NetWare
Off
Change #
Back
Auto
NetWare Frame
802.3
Back
USB
Interface
Network
Network Setting
NetWare
TCP/IP
EtherTalk
Back
On
EtherTalk
Off