Kyocera TASKalfa 221 - RAM Disk Size

Printer Settings
2-43
3
Press the Enter key.
4
Press the S key or the T key to select RAM Disk
Mode.
5
Press the Enter key.
6
Press the S key or the T key to select Change #.
7
Press the Enter key.
The operation procedure of each item is the same as that of the memory card operation. See
Memory Card Operation on page 2-35.
RAM Disk Size
1
Press the Printer key.
2
Press the S key or the T key to select MENU.
3
Press the Enter key.
4
Press the S key or the T key to select RAM Disk
Mode.
5
Press the Enter key.
6
Press the S key or the T key to select Change #.
7
Press the Enter key.
8
Press the S key or the T key to select RAM Disk
Size.
9
Press the Enter key.
10
Press the < key or the > key to input the RAM disk size.
You can set the size to 1 to 1024 Mbyte.
Menu
Page Set
Print Quality
RAM Disk Mode
Change #
On
RAM Disk Mode
Off
GO
CANCEL
Ready
MENU
Menu
Page Set
Print Quality
RAM Disk Mode
Change #
On
RAM Disk Mode
Off
Back
RAM Disk Mode Setting
RAM Disk Size
List of Partitions
RAM Disk size
28 Mbyte