Kyocera TASKalfa 221

System Menu
3-14
4
Press the S key or the T key to select Auto
Detection Metric, Auto Detection Inch or a
paper size.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.
Paper Type (cassettes 1 to 4)
Set the paper types of cassettes 1 to 4.
Paper types that can be set: Plain, Preprinted, Bond, Recycled, Rough, Letterhead,
Color [Colour], Prepunched, High quality, Custom 1(to 8)
Note For the 18 ppm model, cassettes 2 to 4 are included in the optional paper feeder. For the 22 ppm
model, cassettes 3 and 4 are included in the optional paper feeder. This setting is displayed only if
the optional paper feeder is installed.
1
Display the Machine default screen. (See How to Display the Machine Default Screen on
page 3-12.)
2
Press the S key or the T key to select the cassette for
which you set the paper type from Paper Type(1st)
to (4th).
3
Press the Enter key.
4
Press the S key or the T key to select the paper type.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.
Multi Purpose Tray Confirmation Display
Select whether or not to display the MP Tray Paper size screen when pressing the Paper
Select key to select the multi purpose tray.
1
Display the Machine default screen. (See How to Display the Machine Default Screen on
page 3-12.)
2
Press the S key or the T key to select Check MP
Tray.
3
Press the Enter key.
Paper Size (1st cassette ):
Auto Detection Metric
Auto Detection Inch
*
Machine Default :
Paper Type(1st) Plain:
Paper Size(3rd) Auto M
:
Paper Size(4th) Auto I
:
Paper Type (1st cassette ):
Plain
Preprinted
*
Bond
Machine Default :
Check MP Tray Off:
Paper Type(3rd) Plain:
Paper Type(4th)
Plain: