Kyocera TASKalfa 221 - Original Image Quality

System Menu
3-3
Note The four-digit management code can be changed. (See Administrator Management Code
Change on page 3-23.)
5
If the management code is accepted, the Copy
Default screen is displayed.
Next, perform the setting referring to the following
description of each setting item.
Note The * (asterisk) at an item on each setting screen indicates the current setting.
Density Mode
Set the Default density mode: auto or manual.
1
Display the Copy Default screen. (See How to Display the Copy Default Screen on page 3-2.)
2
Press the S key or the T key to select Density
Mode.
3
Press the Enter key.
4
Press the S key or the T key to select Auto or
Manual.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.
Original Image Quality
Set the default original image quality mode.
1
Display the Copy Default screen. (See How to Display the Copy Default Screen on page 3-2.)
2
Press the S key or the T key to select Orig
Quality.
3
Press the Enter key.
4
Press the S key or the T key to select Text+Photo,
Text or Photo.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.
End
Density Mode
Copy Default:
Original Image
Manual
Txt+Phto
:
:
End
Density Mode
Copy Default:
Original Image
Manual
Txt+Phto
:
:
Density Mode:
Auto
Manual
*
End
Density Mode
Copy Default:
Original Image
Manual
Txt+Phto
:
:
Original Image :
Text+Photo
Text
*
Photo