Copier Functions
1-6
Copy Density Adjustment
This section explains how to adjust the copy density. The following modes are available for copy
density adjustment.
Auto Density Mode
Press the Auto Density key. The machine detects the
density of the original and sets the optimum density.
Notes • You can make adjustments to the auto density mode if the overall copies come out too dark or
too light. (See Auto Density Adjustment on page 3-6.)
• If you select Photo as the image quality mode, you cannot select the auto density mode.
Manual Density Mode
Press the Lighter key or the Darker key to adjust the
density. The density display indicates the current
density level.
Note You can change the default setting for the copy density to the auto density mode. (See Density
Mode on page 3-3.)
Mode Description
Auto density mode The machine detects the density of the original and sets the optimum
density.
Manual density mode The operator presses the Lighter key or the Darker key to adjust the
density.
To Next Page
Loading...
