Kyocera TASKalfa 221 - Silent Mode; Auto Drum Refresh Setting

System Menu
3-25
Silent Mode
This mode reduces operating noise of this machine. Use this mode if the operating noise of this
machine is annoying.
1
Display the Machine default screen. (See How to Display the Machine Default Screen on
page 3-12.)
2
Press the S key or the T key to select Silent Mode.
3
Press the Enter key.
4
Press the S key or the T key to select On or Off.
5
Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.
Auto Drum Refresh Setting
If the machine is used under the high humidity environment, there might be the possibility to get
horizontal line on the half tone section which is printed. In this case, please follow the following
procedure to set for performing drum refresh automatically. Once auto drum refresh is set On, the
drum refresh will be performed when turning on the main power switch or Power key.
Note This setting is displayed only on the 25 ppm model.
1
Display the Machine default screen. (See How to Display the Machine Default Screen on
page 3-12.)
2
Press the S key or the T key to select Auto Drum
Refresh.
3
Press the Enter key.
4
Press the S key or the T key to select On.
5
Press the Enter key.
6
Press the Reset key.
Silent Mode
Auto Clear
Auto Sleep
Machine Default :
On:
:
:On
Off
Silent Mode :
Off
On
*
Auto Clear Time
Silent Mode
Machine Default :
Auto DrumRefresh
Sec.
On:
:Off
:90
Auto Drum Refresh :
Off
On
*