Kyocera TASKalfa 221 - Duplex Print for Paper Type

System Menu
3-16
Duplex Print for Paper Type
Select whether or not to use paper of custom 1 to 8 in duplex printing.
1
Display the Machine default screen. (See How to Display the Machine Default Screen on
page 3-12.)
2
Press the S key or the T key to select
P.type(Duplex).
3
Press the Enter key.
4
Press the S key or the T key to select the paper type
to set from Custom 1 (to 8).
5
Press the Enter key.
6
Press the S key or the T key to select On or Off.
7
Press the Enter key.
8
When all setting is complete, press the S key or the T
key to select End.
9
Press the Enter key.
10
Press the Reset key. The message display returns to the copier basic screen.
Machine Default :
Check MP Tray
P. Type (Weight)
P. Type (2sided)
Off:
Select
paper
type (2sided):
Custom 2
O
:
End
Custom 1
O
:
Custom 1:
Off
On
*
Select paper type (2sided):
Custom 2 On:
End
Custom 1 On
: