Copier Functions
1-11
1
Set the original.
2
Press the Staple key.
3
Press the S key or the T key to select the desired
stapling position.
4
Press the Enter key.
5
Press the Start key. Scanning of the original starts.
If the originals have been set in the optional document processor, copying starts automatically.
If the original has been set on the platen, a message prompting replacement of the original is
displayed. In this case, proceed to the next step.
6
Replace the original and press the Start key. Scanning of the original is performed.
7
When all originals have been scanned, press the Enter key. Copying starts.
Staple :
Left Top
Right Top
To Next Page
Loading...
