Kyocera TASKalfa 221 - Page 39

Printer Settings
2-13
4
Press the S key or the T key to select Quick Copy.
5
Press the Enter key.
6
Press the < key or the > key to input the maximum
number of jobs that can be stored. You can set the
number to 0 to 50.
7
Press the Enter key.
Capacity for Storage of Temporary Code Jobs
Set the total capacity (upper limit) for storage of temporary code jobs in the hard disk. The actual
maximum size, however, is the size of available hard disk space.
1
Display the e-MPS screen.
2
Press the S key or the T key to select e-MPS
Configuration.
3
Press the Enter key.
4
Press the S key or the T key to select Temp Code
Job Size [Temp. code Job size].
5
Press the Enter key.
6
Press the < key or the > key to input the capacity for
storage of temporary code jobs. You can set the
capacity to 0 to 9999 MB.
7
Press the Enter key.
Total Capacity for Storage of Permanent Code Jobs
Set the total capacity (upper limit) for storage of permanent code jobs in the hard disk. The actual
maximum size, however, is the size of available hard disk space.
1
Display the e-MPS screen.
Press the S key or the T key to select e-MPS
Configuration.
2
Press the Enter key.
Back
Quick Copy
e-MPS Configuration
Temp Code Job Size
(0
Quick Copy
32 50)
List of VMB
List of Code JOB
e-MPS
e-MPS Configuration
Back
Back
e-MPS Configuration
Temp Code Job Size
Temporary Code Job Size
1550 Mbyte
List of VMB
List of Code JOB
e-MPS
e-MPS Configuration