EasyManua.ls Logo

Kyocera TASKalfa 5551ci - Electric Problem: Paper Conveying Unit Sensor Error; Electric Problem: Duplex Cover Sensor Error; Electric Problem: Paper Conveying Cover Sensor Error

Kyocera TASKalfa 5551ci
317 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2L6/2N6/2N5/2N4
1-4-299
(36)
A message indicat-
ing unit open is dis-
played when the
paper conveying
unit is closed.
1. Defective connector
cable or poor con-
tact in the connector.
Reinsert the connector. Also check for continuity within the
connector cable. If none, replace the cable.
Paper conveying unit switch and feed PWB 1 (YC15)
Feed PWB 1 (YC4) and power source PWB (YC12)
2. Defective switch. Replace the paper conveying unit switch.
(37)
A message indicat-
ing cover open is
displayed when the
duplex cover is
closed.
1. Defective connector
cable or poor con-
tact in the connector.
Reinsert the connector. Also check for continuity within the
connector cable. If none, replace the cable.
Duplex cover switch and relay PWB (YC7)
Relay PWB (YC1) and feed PWB 1 (YC14)
Feed PWB 1 (YC1)and engine PWB (YC6)
2. Defective switch. Replace the duplex cover switch.
(38)
A message indicat-
ing cover open is
displayed when the
paper conveying
cover is closed.
1. Defective connector
cable or poor con-
tact in the connector.
Reinsert the connector. Also check for continuity within the
connector cable. If none, replace the cable.
Paper conveying cover switch and feed PWB 2 (YC6)
Feed PWB 2 (YC1) and power source PWB (YC4)
2. Defective switch. Replace the paper conveying cover switch.
Problem Causes Check procedures/corrective measures

Table of Contents

Other manuals for Kyocera TASKalfa 5551ci

Related product manuals