2L6/2N6/2N5/2N4-1
1-4-5
* : This model does not support the following codes: 0132 /0505 /0515 /9030
List of JAM Code
Code Contents Conditions
Jam
location*
0000 Initial jam The power is turned on when a sensor in the convey-
ing system is on.
-
0100 Secondary paper feed
request time out
Secondary paper feed request given by the controller
is unreachable.
-
0101 Waiting for process
package to become
ready
0102 Waiting for toner pack-
age to become ready
0103 Waiting for the image-
sustaining package to
become ready
0104 Waiting for conveying
package to become
ready
0106 Paper feeding request
for duplex printing time
out
Paper feeding request for duplex printing given by the
controller is unreachable.
-
0107 Waiting for fuser pack-
age to become ready
0108 Waiting for option pack-
age to become ready
0110 Paper conveying unit
open
The paper conveying unit is opened during printing. E
0111 Front cover open The front cover is opened during printing. -
0112 Duplex cover open The duplex cover is opened during printing. F
0113 Paper conveying cover
open
The paper conveying cover is opened during printing. E
0114 BR conveying unit open The BR conveying unit is opened during printing. J
0115 BR eject cover open The BR eject cover is opened during printing. J
0131 MP lift sensor upper limit
detection
MP lift sensor 1 (MPLS1) does not turn on within spec-
ified time of the MP lift plate rising.
D
0132 Rotary guide detection Rotary sensor (RTS) does not turn on. J
0200 Machine sequence error A sequence error has occurred. -
0210 PF paper conveying
cover open
The PF paper conveying cover is opened during print-
ing.
E
0211 SM paper conveying
cover open
The SM paper conveying cover is opened during print-
ing.
N
0212 SM top cover open The SM top cover is opened during printing. N
*: Refer to figure 1-4-1 for paper misfeed indication (see page 1-4-1).
To Next Page
Loading...
