Kyocera TASKalfa 5551ci - PF Paper Feed Motor Error (Side Large Capacity Feeder); PF Paper Feed Motor Error (Side Paper Feeder)

2L6/2N6/2N5/2N4
1-4-96
2660 PF paper feed motor error
(side large capacity feeder)
[45 ppm/55 ppm model]
After PF paper feed motor is
driven, the ready signal does
not turn to L within 2 s.
PF paper feed
motor
1. To check the feed unit operation, exe-
cute U247 Side LCF - Motor ON (see
page 1-3-148).
2. Check the paper feed roller and drive
gear can rotate or they are not unusually
loaded and, if necessary, replace.
3. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way in.
PF paper feed motor and PF main PWB
(YC16)
4. If the wiring is disconnected, shorted or
grounded, replace the wiring.
5. Replace the PF paper feed motor.
PF main PWB
Replace the PF main PWB (Refer to the
service manual for the paper feeder).
2670 PF paper feed motor error
(side paper feeder)
[45 ppm/55 ppm model]
After PF paper feed motor is
driven, the ready signal does
not turn to L within 2 s.
PF paper feed
motor
1. Execute Side 2PF - Motor ON of U247
feed unit operation check (see page 1-3-
148).
2. Check the paper feed roller and drive
gear can rotate or they are not unusually
loaded and, if necessary, replace.
3. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way in.
PF paper feed motor and PF main PWB
(YC16)
4. If the wiring is disconnected, shorted or
grounded, replace the wiring.
5. Replace the PF paper feed motor.
PF main PWB
Replace the PF main PWB (Refer to the
service manual for the paper feeder).
Code Contents Related parts
Check procedures/
corrective measures