Kyocera TASKalfa 5551ci - Paper Jam: Feeding from Cassette 2 (Electrical)

2L6/2N6/2N5/2N4
1-4-44
(4) Paper jam at feeding from cassette 2
Electrical parts that could cause paper jam during paper travelling at the primary
feeding (to regist roller)
Timing of detection
Corrective Action
*1: 30 ppm model /35 ppm model only. *2: 45 ppm model /55 ppm model only.
Jam code
J0502,J0512,J1302,J1312,J1502,J1512,J4002,J4012
Related parts
Paper feed motor(PFM) Engine PWB (EPWB)
Paper feed clutch 2 (PFCL2) Feed PWB 2 (FPWB2)
Assist clutch 2 (ACSL2)
*2
Feed PWB 1 (FPWB1)
Middle clutch (MCL)
*1
Middle motor (MM)
*2
Registration clutch (RCL)
*1
Registration motor (RM)
*2
Vertical conveying clutch (PCCL)
Feed sensor 2 (FS2)
Paper conveying sensor (PCS)
Middle sensor (MS)
Registration sensor (RS)
Checking
procedure at the
occurrence of
J05X2
Corrective action at the occurrence of
J05X2
On/Off control signal output connector
(terminal), point of checking connection
1 Items for Initial Checks see page 1-4-29
2
Feed sensor 1 (FS1): Conduct
connectivity check, mounting location
check, operation check (U031)
Feed PWB 2 YC8-23
3
Paper feed clutch 2 (PFCL2): Operation
check (U032)
Feed PWB 2 YC4-1
4
Paper feed motor : Operation check
(U030)
Feed PWB 2 YC2-3(RDY), 5(REM)
5
Feed PWB 2: Replace
6
Engine PWB : Replace