Kyocera TASKalfa 5551ci - Page 44

2L6/2N6/2N5/2N4
1-4-43
*1: 30 ppm model /35 ppm model only. *2: 45 ppm model /55 ppm model only.
*1: 30 ppm model /35 ppm model only. *2: 45 ppm model /55 ppm model only.
Checking
procedure at the
occurrence of
J13X
Corrective action at the occurrence of
J13X1
On/Off control signal output connector
(terminal), point of checking connection
1
Items for Initial Checks see page 1-4-29
2
Middle sensor (MS) : Conduct
connectivity check, mounting location
check, operation check (U031)
Feed PWB 2 YC8-9
3
Assist clutch 1 (ACSL1)
*2
:Operation
check (U032)
Feed PWB 2 YC10-1
4
Middle clutch (MCL)
*1
:
Middle motor (MM)
*2
:Operation check
(U032/30)
Feed PWB 2 YC7-14 / YC7-1 to 4
5 Feed PWB 2: Replace
6 Engine PWB : Replace
Checking
procedure at the
occurrence of
J40X1
Corrective action at the occurrence of
J40X1
On/Off control signal output connector
(terminal), point of checking connection
1 Items for Initial Checks see page 1-4-29
2
Registration sensor (RS): Conduct
connectivity check, mounting location
check, operation check (U031) and U051
- Slack Margin Settings.
Feed PWB 2 YC7-12
3
Registration clutch (RCL)
*1
Registration motor (RM)
*2
: Operation
check (U032/30)
Feed PWB 1 YC22-2 / YC25-1 to 4
4
Feed PWB 1 : Replace
5
Engine PWB : Replace