4-14
Printing from PC > Printing from PC
4 Adjust the paper width guides to the width of the paper.
5 Adjust the paper width guides on the banner tray to the same width as the paper width
guides on the multi purpose tray and lock.
If there is a gap between the paper and the paper width guides, readjust the guides
to fit the paper in order to prevent skewed feeding and paper jams.
Remove the paper when banner printing finishes, or when you are not using the banner tray.
The print confirmation screen can be set in System Menu to not appear when the banner tray is attached. This will
allow continuous printing on multiple sheets. Refer to the follows:
Message Banner Print (page 8-30)
To Next Page
Loading...
