5-40
Operation on the Machine > Send to Me (E-mail)
Send to Me (E-mail)
When user login is enabled, the document is sent to the E-mail address of the logged in user.
Configuring Settings before Sending
To use this function, configure the followings.
To use this function, the function icon must be displayed in the home screen.
Editing the Home Screen (page 2-15)
An E-mail address must be set in user login for the user who logs in.
Adding a User (Local User List) (page 9-8)
Sending a Document to the Mail Address of the
Logged In User
1
Select [Home] key.
2
Select [Send to Me (E-mail)].
To Next Page
Loading...
