Kyocera TASKalfa 6052ci

8-63
Setup and Registration (System Menu) > System Menu
Security Level
[System Menu/Counter] key > [System/Network] > [Security Level]
Interface Block Setting
[System Menu/Counter] key > [System/Network] > [Interface Block Setting]
This allows you to protect this machine by blocking the interface with external devices such as USB hosts or optional
interfaces.
Item Description
Security Level Specify the security level.
Value
Low: This mode is used during maintenance. Do not use normally.
High: This is the security setting we recommend. Use this setting
normally.
Very High: In addition to [High] setting, this setting disables the machine
settings to be changed from external command.
NOTE
This function is available when you have logged in as machine administrator.
Adding a User (Local User List) (page 9-8)
Item Description
USB Host This locks and protects the USB port (USB host).
Value: Unblock, Block
USB Device This locks and protects the USB interface connector (USB Device).
Value: Unblock, Block
USB Storage This locks and protects the USB memory slot.
Value: Unblock, Block
NOTE
This function is available when USB Host is set to [Unblock].
Optional Interface 1 This locks and protects the optional interface slots.
Value: Unblock, Block
NOTE
You can set this feature for each slot.
Optional Interface 2
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.