Kyocera TASKalfa 6052ci

6-60
Using Various Functions > Functions
Memo Page
Delivers copies with a space for adding notes.
You can also print two originals onto the same sheet with a space or add lines to indicate page boundaries.
Select [Layout A] or [Layout B] and select the page layout from "Layout".
Layout A
Layout B
NOTE
The paper sizes supported in Memo mode: A3, A4-R, A4, A5-R, A5, B4, B5-R, B5, 216×340 mm, Ledger, Letter-R,
Letter, Legal, Statement-R, Oficio II, Folio, 8K, 16K-R and 16K
Reduces images of each original page for printing onto half of a page,
leaving the other half blank for notes.
Reduces images of two original pages for printing onto half of a page,
leaving the other half blank for notes.
Item Value Description
Off
Layout A Layout Left/Top, Right/Bottom Select how to lay out the pages of scanned
original.
Border Line None, Solid Line, Dotted Line,
Positioning Mark
Select the boundary line type. Select [Border
Line] to select the page boundary line, and select
[OK].
Original
Orientation
Top Edge on Top,
Top Edge on Left, Auto
*1
Select the orientation of the original document top
edge to scan correct direction. Select [Original
Orientation] to choose orientation of the originals,
either [Top Edge on Top] or [Top Edge on Left].
Then select [OK].
Copy
Layout/Edit
Original Copy
Original Copy