7-13
Status/Job Cancel > Device/Communication
Device/Communication
Configure the devices/lines installed or connected to this machine or check their status.
1
Display the screen.
1 Select the [Status/Job Cancel] key.
2 Select [Device/Communicate].
The screen to check the status or configure the devices is displayed.
2
Check the status.
The items you can check are described below.
"Scanner"
The status of an original scanning or the error information (paper jam, opened cover, etc.) is
displayed.
"Printer"
Error information such as paper jam, out of toner, or out of paper, and status such as waiting or
printing are displayed.
"FAX Port 1", "FAX Port 2", "i-FAX"
• The information such as sending/receiving and dialing is displayed.
"Removable Memory (USB Memory)"
• The usage, capacity and free space of the external media connected to this machine are
displayed.
•Select [Format] to format external media.
•Select [Remove] to safely remove the external media.
"Hard Disk"
The status of the hard disk is displayed.
"Connectivity"
The network connection status and the status of the optional keyboard are displayed.
FAX Operation Guide
When [Format] is selected, all data in the external media is erased.
To Next Page
Loading...
