Kyocera TASKalfa 6052ci

8-55
Setup and Registration (System Menu) > System Menu
Bonjour
[System Menu/Counter] key > [System/Network] > [Network] > [Bonjour]
IPSec
[System Menu/Counter] key > [System/Network] > [Network] > [IPSec]
Protocol Settings
[System Menu/Counter] key > [System/Network] > [Network] > [Protocol Settings]
Configure protocol settings.
Item Description
Bonjour Select whether to use Bonjour.
Value: Off, On
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network
Item Description
IPSec Select whether to use IPSec.
Value: Off, On
Item Description
SMTP (E-mail TX) Select whether to send E-mail using SMTP.
Value: Off, On
POP3 (E-mail RX) Select whether to receive E-mail using POP3.
Value: Off, On
FTP Client (Transmission) Select whether to send documents using FTP. To use the FTP Client, set the protocol
to [On]. The default port number is 21.
Value: Off, On
FTP Server (Reception) Select whether to receive documents using FTP.
*1
Value: Off, On
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network
SMB Client (Transmission): Select whether to send documents using SMB. To use the SMB Client, set the
protocol to [On]. The default port number is 445.
Value: Off, On
NetBEUI Selects whether to receive documents using NetBEUI.
*1
Value: Off, On
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network