Kyocera TASKalfa 6052ci - Page 438

8-58
Setup and Registration (System Menu) > System Menu
SNMPv1/v2c Select whether to communicate using SNMP.
*1
Value: Off, On
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network
SNMPv3 Select whether to communicate using SNMPv3.
*1
Value: Off, On
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network
Enhanced WSD Set whether to use our proprietary web services.
*1
Value: Off, On
NOTE
Selecting [Off] will disable the functionality of WIA, TWAIN, and Network FAX driver.
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network
Enhanced WSD over SSL Set whether to use our proprietary web services over SSL.
*1, *2
Value: Off, On
NOTE
Selecting [Off] will disable the functionality of WIA, TWAIN and Network FAX drivers.
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network
eSCL Selects whether to receive scanned documents using eSCL.
*1
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network
eSCL over SSL Selects whether to receive scanned documents using eSCL over SSL.
*1, *2
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network
*1 The setting will be changed after restarting the device or network.
*2 Set "SSL" to [On] in Security Settings.
Security Settings
(page 8-59)
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description