Kyocera TASKalfa 6052ci

8-11
Setup and Registration (System Menu) > System Menu
Keyboard Layout
[System Menu/Counter] key > [Common Settings] > [Keyboard Layout]
Original / Paper Settings
[System Menu/Counter] key > [Common Settings] > [Original / Paper Settings]
Configure settings for originals and paper.
Item Description
Keyboard Layout Change the layout of the touch panel keyboard used to enter characters.
Value: QWERTY, QWERTZ, AZERTY
Item Description
Custom Original Size Set up frequently-used custom original size.
The custom size option is displayed on the screen to select original size.
To register a custom original size, select [On] and enter the desired size. Up to four
custom original sizes can be added.
Value
Metric
X: 50 to 432 mm (in 1 mm increments)
Y: 50 to 297 mm (in 1 mm increments)
Inch
X: 2.00 to 17.00" (in 0.01" increments)
Y: 2.00 to 11.69" (in 0.01" increments)
X=Length, Y=Width
Vertical Horizontal