Kyocera TASKalfa 6052ci

6-57
Using Various Functions > Functions
Erase Shadowed Areas
When scanning with the document processor or original cover open, erase the extra shaded area.
(Value: [Off] / [On])
Page #
Adds page numbers to the finished documents.
The available formats for numbering are [-1-], [P. 1 ] and [1/n]. The format [1/n] prints the total number of pages in the
place of "n".
Select the numbering format from [-1-], [P. 1 ] or [1/n].
Item Value Description
Off
-1-, P.1,
1/n
Position Top Left, Top Middle,
Top Right, Bottom Left,
Bottom Middle,
Bottom Right, Detail
Select the print position of page number.
Select [Detail] to specify the detailed page number
position using numeric values, and to set the page
number position ([Same as Front Page], [Mirror Front
Page]) when a page number is placed on the back side
of the paper in duplex printing.
1st Page 1 to 10 To start page numbering from a page other than the first
page, select [+] or [-] in "1st Page" to specify the starting
page. Select [# Keys] to use the numeric keys for entry.
Start # 1 to 999 To start the numbering with a number other than 1,
select [+] or [-] in "Start Number" to specify the starting
number. Select [# Keys] to use the numeric keys for
entry.
Copy
Layout/Edit
Send
Advanced
Setup
Custom
Box
Functions
USB
Memory
Functions
Copy
Layout/Edit
Custom
Box
Functions
Original [-1-][P. 1 ][1/n]