Kyocera TASKalfa 6052ci - Simple Login Settings; Enabling Simple Login

9-28
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Simple Login Settings
The simple login function allows users to log in simply by selecting a user name. Users must be registered in advance to
use this functionality.
Enabling Simple Login
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 "User Login Setting" [Next] > "Simple Login Settings" [Next] > "Simple Login" [Change]
2
[On] or [Off] > [OK]
NOTE
• For user registration, refer to the following:
Adding a User (Local User List)
(page 9-8)
• To use Simple Login, User Login Administration must be enabled in "Enabling User Login Administration".
Enabling User Login Administration
(page 9-3)
• When the guest authorization setting is enabled, the Simple Login screen is not displayed.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Model Name Login User Name Login Password
2552ci 2500 2500
3252ci 3200 3200
4052ci 4000 4000
5052ci 5000 5000
6052ci 6000 6000