Kyocera TASKalfa 6052ci

8-60
Setup and Registration (System Menu) > System Menu
Optional Network
[System Menu/Counter] key > [System/Network] > [Optional Network]
Basic
Configure settings for the optional Network Interface Kit.
NOTE
This menu is displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.
Item Description
Host Name Check the host name of the machine. Host name can be changed from Command
Center RX.
Changing Device Information (page 2-64)
TCP/IP Setting For details on setting value.
TCP/IP Setting (page 8-49)
Bonjour (page 8-55)
IPSec (page 8-55)
NetWare Use NetWare to receive documents.
See the Operation Guide for the optional network interface card for details.
Value: Off, On
AppleTalk Selects whether to receive documents using AppleTalk.
*1
Value: Off, On
*1 The setting will be changed after restarting the device or network.
LAN Interface Select the LAN Interface type.
*1
Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full,
1000BASE-T
NOTE
This function is displayed when the optional Network Interface Kit is installed.
MAC Address Filter Select whether to use MAC Address Filter.
Operation Guide for the optional Network Interface Kit
Value: Off, On
Restart Network Restarts the network card of the device.