Kyocera TASKalfa 6052ci - Page 441

8-61
Setup and Registration (System Menu) > System Menu
Wireless Network
Configure settings for the optional Wireless Network Interface Kit.
NOTE
This function is displayed when the Wireless Network Interface Kit (IB-51) is installed.
Item Description
Connection Status You can check the wireless LAN status.
Quick Setup If the machine will connect to an access point that supports the automatic wireless
network setup, connection settings can be configured by Quick Setup.
Available Network Select access points to which the machine can be connected, enter the Preshared
Key and start a connection.
Push Button Method If the access point supports the push button method, wireless settings can be
configured using the push button. This setting executes push button, and the
connection is started by pressing the push button on the access point.
NOTE
The push button method supports only the WPS.
PIN Code Method
(Device)
Starts connection using the machine's PIN code. Enter the PIN code into the access
point. The PIN code of the machine is automatically generated.
PIN Code Method
(Terminal)
Starts connection using the PIN code of the access point. Enter the PIN code of the
access point.