5-28
Operation on the Machine > Sending Document to Folder on an FTP Server (Scan to FTP)
Sending Document to Folder on an FTP
Server (Scan to FTP)
Configuring Settings before Sending
Before sending a document, configure the FTP Client (Transmission).
Protocol Settings (page 8-55)
Sending Document to Folder on an FTP Server
When transmitting using wireless LAN, select the interface dedicated to the send function in advance.
Primary Network (Client) (page 8-62)
1
[Home] key > [Send]
2
Place the originals.
3
In the basic screen for sending, select [Folder Path Entry].
4
Enter the destination information.
1 Select [FTP].
2 Select the key of each item > enter the destination data > [OK].
Loading Originals (page 5-2)
Character Entry Method (page 11-10)
To Next Page
Loading...
