6-51
Using Various Functions > Functions
Printing
Book >>
Booklet
*2
Original Binding Left,
Binding Right
Select the binding direction of originals.
Finishing Binding Left,
Binding Right
Select the binding orientation of copies.
Cover Off, Cover Select whether to add the cover. Select
[Cover] to select [Cover], and select [OK].
Staple/Fold Off, Fold Only,
Saddle Stitch
To fold finished copies in half, select
[Staple/Fold] and then select [Fold Only].
To use saddle stitching, select [Staple/
Fold] and then select [Saddle Stitch].
*1 This function can only be used when the optional OCR Scan Activation Kit is installed.
*2 [Top Edge on Top] is set for "Original Orientation".
Item Value Description
Off
Booklet Binding Left, Right, Top Select the binding orientation of copies.
Cover Off
Cover:
Front Cover
Print Setting
Not Print,
Front Only,
Back Only, Duplex
Select whether to add the cover. Select the
printing method for the cover to be
inserted.
Select [Cover], and then [Cover], and
specify the print setting for the cover to be
inserted. Select from [Not Print], [Back
Only], [Front Only], and [Duplex], and
press [OK].
Cover:
Back Cover
Print Setting
Not Print,
Front Only,
Back Only, Duplex
Staple/Fold Off, Fold Only,
Saddle Stitch
To fold finished copies in half, select
[Staple/Fold] and then select [Fold Only].
To use saddle stitching, select [Staple/
Fold] and then select [Saddle Stitch].
• The number of sheets that can be folded or Saddle Stitch stapled varies depending on paper weight. For details,
refer to the following:
Folding Unit (page 11-31)
• When placing the original on the platen, be sure to place the originals in page order.
Item Value Description
To Next Page
Loading...
