8-3
Setup and Registration (System Menu) > System Menu
Refer to System Menu Settings on the following page and configure as needed.
• In order to change settings that require administer privileges, you must log in with administrator privileges.
The factory default login user name and login password are set as shown below.
• If function default settings have been changed, the [Reset] key can be selected in each function screen to
immediately change the settings.
Model Name Login User Name Login Password
2552ci 2500 2500
3252ci 3200 3200
4052ci 4000 4000
5052ci 5000 5000
6052ci 6000 6000
To Next Page
Loading...
