8-27
Setup and Registration (System Menu) > System Menu
Storing Jobs Configure stamp settings for storing documents in removable memory.
After configuring the setting, return to the Custom Box (Storing Documents) screen
from System Menu, and select the [Reset] key.
Text Stamp Select whether to print a text stamp on all storing jobs.
Value: Off, On
When [On] is selected, the Text Stamp settings cannot be changed when storing.
Edit Text Stamp Set the default text stamp.
Stamp Select a text string to be stamped from templates, or select [Stamp] and enter a
maximum of 32 characters for the text string.
Templates that have been set will appear. For details on registering templates, refer to the
following:
Text (Text Stamp) (page 8-22)
Position Set the text stamp position.
Value: Top Left, Top Middle, Top Right, Middle Left, Center, Middle Right,
Bottom Left, Bottom Middle, Bottom Right, Detail
Select [Detail] to specify the detailed stamp position using numeric values, and to set
the stamp angle.
Font Set the font of the text stamp.
Value
Size: Font sizes registered in Font (Text Stamp) are displayed.
Font (Text Stamp) (page 8-22)
Character Border: Off, Circle, Rectangle, Underline
Style: None, Bold, Italic, Bold/Italic
Font: Courier, Letter Gothic
Color: Black, Red, Green, Blue, Cyan, Magenta, Yellow, White
Density: 10 to 100% (in 10% increments)
Display Pattern: Transparent, Clipping, Overwrite
Item Description
To Next Page
Loading...
