Kyocera TASKalfa 6052ci - Page 415

8-35
Setup and Registration (System Menu) > System Menu
Send and Forward Select whether to forward the original to another destination when sending images.
Forward Select whether to forward the original.
Value: Off, On
NOTE
When selecting [On], select rules to forward from [E-mail], [Folder(SMB)],
[Folder(FTP)], [FAX]
*2
, [i-FAX(Via server-On)]
*3
, and [i-FAX(Via server-Off)]
*3
.
Destination Set the destination to which the original is forwarded. One destination can be set.
Follow the steps below to register the destination.
• Address Book
• E-mail Addr Entry
• Folder Path Entry
Specifying Destination (page 5-42)
Color Setting Configure the color settings for forwarded original.
Value: Auto Color (Color/Gray), Auto Color (Color/B & W), Full Color, Grayscale,
Black & White
Scan Resolution Select resolution for stored original.
Value: 600x600dpi, 400x400dpi Ultra Fine, 300x300dpi, 200x400dpi Super Fine,
200x200dpi Fine, 200x100dpi Normal
File Format Select the file format of forwarded original.
File format for Send and Forward (page 8-36)
File Separation Set whether originals are divided into multiple files before being forwarded.
Value: Off, Each Page
E-mail Subject Enter a maximum of 60 characters for the subject of forwarded E-mail.
Character Entry Method (page 11-10)
FTP Encrypted TX Set whether originals are encrypted before being forwarded.
Value: Off, On
NOTE
This function is displayed when SSL is set to [On] in Security Settings.
Security Settings (page 8-59)
New Destination Entry Select whether to permit direct entry of destination.
Value: Prohibit, Permit
Recall Destination Select whether to permit usage of [Recall] on the Send screen.
Value: Prohibit, Permit
Broadcast Set whether to enable broadcast.
Value: Prohibit, Permit
Item Description