Kyocera TASKalfa 6052ci - Page 450

8-70
Setup and Registration (System Menu) > System Menu
Sleep Rules (models for
Europe)
Select whether to use the Sleep mode for the following functions individually:
•Network
• USB Cable
• ID Card Reader
*1
•FAX
*2
• Application
Value: Off, On
NOTE
• If the sleep condition is not turned off, the machine will not wake from sleep mode
even if it receives a print job from a computer connected by USB cable. Also, the
ID card cannot be recognized.
• This function will not be displayed when the optional Network Interface Kit or Fiery
controller is installed.
Sleep Level (models except
for Europe)
Select the sleep level.
Set the Energy Saver mode to reduce power consumption even more than normal
Sleep mode.
Value: Quick Recovery, Energy Saver
NOTE
This function will not be displayed when the optional Network Interface Kit or Fiery
controller is installed.
Sleep Rules Select whether to use the Energy Saver mode for the following functions individually:
•Network
• USB Cable
• ID Card Reader
*1
•FAX
*2
• Application
Value: Off, On
NOTE
When the machine has entered sleep mode with Energy Saver setting, it does not
wake from sleep mode when it receives print data from a PC connected by USB
cable. Also, the ID card cannot be recognized.
EnergySaver
RecoveryLevel
Select the method of recovery from energy saver.
Value:
Full Recovery: This mode enables the use of all functions immediately.
However, this mode saves less energy.
Normal Recovery: In this mode, you can select the method from the following:
enabling the use of all functions immediately or enabling
the use of desired functions only.
If you want to use all functions immediately, select the
[Energy Saver] key to execute recovery.
Power Saving Recovery: This mode enables the use of desired functions only.
This mode saves energy most effectively.
Item Description