8-74
Setup and Registration (System Menu) > System Menu
Calibration Calibrate the device to ensure correct toner overlapping and consistency with the
original tone.
Calibration (page 10-54)
Perform Color Registration when correct toner overlapping is not ensured even after
performing Calibration, and perform Tone Curve Adjustment if consistency with the
original tone is not ensured.
Developer Refresh Adjust the printed image that is too light or incomplete, even though there is enough
toner.
Developer Refresh (page 10-55)
Waiting time may be longer when the toner is refilled during developer refresh.
Laser Scanner Cleaning Remove vertical white lines from the printout.
Laser Scanner Cleaning (page 10-55)
Contrast You can increase or decrease the overall contrast.
Copy Increases or decreases the overall contrast of copies.
Value: -3 (Lower), -2, -1, 0 (Normal), +1, +2, +3 (Higher)
Send/Box Increases or decreases the overall contrast when documents are sent or saved in a
document box.
Value: -3 (Lower), -2, -1, 0 (Normal), +1, +2, +3 (Higher)
Auto Drum Refresh Select the time length of the drum refresh.
Value
Off: The Auto Drum Refresh will not be performed.
Short: Perform Auto Drum Refresh as Short.
Standard: Perform Auto Drum Refresh as Standard.
Long: Perform Auto Drum Refresh as Long.
[Off] is not displayed on the 2552ci and 3252ci.
Open toner cover Open the toner cover.
This function is displayed when using a genuine toner container.
*1 Displayed only when the optional FAX Kit is installed.
Item Description
To Next Page
Loading...
