Kyocera TASKalfa 6052ci - Page 550

10-39
Troubleshooting > Troubleshooting
Performing Drum
Refresh...
— The machine is under the
adjustment to maintain its
quality. Please wait.
—
Perform Tone Curve
Adjustment in the
System Menu.
Over long periods of use, the
effects of the ambient
temperature and humidity can
cause output hues to vary
slightly.
Run [Tone Curve Adjustment]. page 10-53
Preparing to print. — The machine is under the
adjustment to maintain its
quality. Please wait.
—
Printing System error. — An error has occurred on
Printing System.
Refer to Responding to Printing
System Error for the error code
and corrective actions.
page 10-47
Printing System error.
Press Status/Job
Cancel key to check
error.
Select [Status/Job Cancel] key.
Is the [Printing System Error.]
message displayed?
An error has occurred on
Printing System.
Refer to Responding to Printing
System Error for the error code
and corrective actions.
page 10-47
Select [Status/Job Cancel] key.
Is the [Device/Communication]
screen displayed?
An error has occurred on
Printing System.
Select [Printing Sys Err] of the
[Device/Communication]
screen and check error.
page 10-47
Message Checkpoints Corrective Actions
Reference
Page