L-Acoustics A15 Series User Manual

Rigging system description
16 pickup points on each side, one front pickup point (F), and one rear pickup point (R), are available for site angle
adjustments. They are compatible with Ø12 mm shackles WLL 1 t (two provided) and CLAMP250.
1 2
3
4
5
6 7 8 9 10
11 12
13
14
15 16
F
R
FRONT
1 2
3
4
5
6 7 8 9 10
11 12
13
14
15 16
A15-BUMP can be used as the main lifting accessory for ying vertical arrays of A15 Wide/Focus and KS21 with one or
two lifting points.
A15-BUMP can be secured to the bottom of the array to implement pullback congurations, using the rear pickup point
(R). Alternatively, A15-RIGBAR (p.27) can be used for pullback.
A laser mounting plate is available. Refer to APPENDIX B: Installing the LAP-TEQ inclinometer on A15-BUMP (p.96).
A15 owner's manual (EN) version 1.2 25

L-Acoustics A15 Series Specifications

General

Nominal impedance	8 ohms
Frequency Response	44 Hz - 20 kHz
Maximum SPL	141 dB
Amplification	LA4X / LA8 / LA12X
Weight	33 kg
LF Transducers	1 x 15'' neodymium
HF Transducers	1 x 3'' diaphragm compression driver
Power Handling	800 W
Connectors	2 x 4-point speakON