L-Acoustics A15 Series User Manual

Rigging procedures
Rigging procedures
Flying
Flying a vertical array with A15-BUMP/A15-RIGBAR
Type of deployment own array
A15-BUMP/A15-RIGBARRigging accessory
2 x Ø12 mm shackle WLL 1 t (provided)
M-BAR (optional, with A15-BUMP)
Min number of operators 2
Risk of falling objects
Verify that no unattached items remain on the product or assembly.
Secondary safety
Use available holes on the rigging accessories to implement a secondary safety.
Array orientation
Under A15-BUMP and A15-RIGBAR, the enclosure HF section can be oriented both ways.
Under KS21, the HF section is on the same side as the subwoofer vent.
A15 Wide/Focus array
Procedure
1. Stack up to three enclosures.
Connect each enclosure on both sides before adding the new one.
SHLAK!
A15 owner's manual (EN) version 1.2 49

L-Acoustics A15 Series Specifications

General

Nominal impedance	8 ohms
Frequency Response	44 Hz - 20 kHz
Maximum SPL	141 dB
Amplification	LA4X / LA8 / LA12X
Weight	33 kg
LF Transducers	1 x 15'' neodymium
HF Transducers	1 x 3'' diaphragm compression driver
Power Handling	800 W
Connectors	2 x 4-point speakON