L-Acoustics A15 Series User Manual

Rigging procedures
Attaching K2-JACK stabilizers to KS21-CHARIOT
Type of deployment stacked array
Rigging accessory K2-JACK
KS21-CHARIOT
Min number of operators 1
Assembly
Procedure
1. Attach the K2-JACK bars to KS21-CHARIOT on each side.
a) Open the locking handles to insert the studs.
b) Raise and turn the locking handles to secure the bars.
A15 owner's manual (EN) version 1.2 73

L-Acoustics A15 Series Specifications

General

Nominal impedance	8 ohms
Frequency Response	44 Hz - 20 kHz
Maximum SPL	141 dB
Amplification	LA4X / LA8 / LA12X
Weight	33 kg
LF Transducers	1 x 15'' neodymium
HF Transducers	1 x 3'' diaphragm compression driver
Power Handling	800 W
Connectors	2 x 4-point speakON