L-Acoustics K2 - M - Mounting LA-RAK;LA-RAK II on K2-BUMP

Rigging procedures
M - Mounting LA-RAK/LA-RAK II on K2-BUMP
rigging accessory K2-BUMP / LA-RAK/LA-RAK II
K2-RAKMOUNT (2 rails for 1 LA-RAK/LA-RAK II)
tools electric screwdriver with torque selector
6 mm hex bit
13 mm wrench
Procedure
1. Remove the nuts and bolts from the K2-RAKMOUNT rails.
2. Position and secure as many rails as necessary on the K2-BUMP.
1 LA-RAK/LA-RAK II 2 LA-RAK/LA-RAK II
K2 owner's manual (EN) version 1.1 115