L-Acoustics K2 - Specifications; K2 Product Specifications and Dimensions

Specications
Specications
K2 specications
Description 3-way full-range active WST enclosure, quad-amplied by LA4X / LA8 /
LA12X
Usable bandwidth (-10 dB) 35 Hz - 20 kHz ([K2 70])
Maximum SPL
1
147 dB ([K2 70])
Nominal directivity horizontal: 110°/70° symmetric or 90° asymmetric (35°/55° or 55°/35°)
vertical: dependent upon the number of elements and the line source curvature
Transducers LF: 2 × 12" cone drivers
MF: 4 × 6.5" cone drivers
HF: 2 × 3" diaphragm compression drivers
Acoustical load LF: bass-reex, L-Vents
MF: bass-reex
HF: DOSC waveguide
Nominal impedance LF: 2 × 8 Ω
MF: 8 Ω
HF: 16 Ω
Connectors IN: 1 × 8-point PA-COM
LINK: 1 × 8-point PA-COM
Rigging and handling 4-point captive rigging system
inter-enclosure angles: 0.25°, 1°, 2°, 3°, 4°, 5°, 7.5° or 10°
Weight (net) 56 kg / 123.2 lb
Cabinet premium grade Baltic birch plywood
Front coated steel grill
acoustically neutral 3D fabric
Rigging components high grade steel with anti-corrosion coating
Finish dark grey brown Pantone 426 C
IP IP55
1
Peak level measured at 1 m under free eld conditions using pink noise with crest factor 4 (preset specied in brackets).
K2 owner's manual (EN) version 1.1 161